We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

With the advent of modern analytical techniques, it has become a necessity to be able to perform a complete analysis from a single dissolution. In order to improve solution manufacturing, XRF Scientific has designed several models of fusion machines. These instruments offer many benefits, including increasing productivity and repeatability and productivity without the risks for the operators to manipulate dangerous reagent.

The processes are simpler, quicker and cleaner. Distinguished below are two types of fusions for ICP that require specific conditions and environment. Based on more than 25 years of experience, XRF Scientific has developed the most suitable fusion machines whilst making significant advances to meet exactly these specific fusion requirements.

Rugged electric fusion machine designed for the preparation of 1 to 6 acid solutions for analysis by AA or ICP. When functioning in ICP mode, the fused samples are automatically poured into the Teflon beakers containing the dilute acid solution. With the help of magnetic stirring, the beakers remain in position up to complete dissolution.

The machine is equipped with an exhaust fan, which removes the acid vapor created when the hot liquid is poured into the beaker. Dependent upon the model, the ICP modules can accept one, two or six beakers of 100 ml. Each position is fitted with a separate magnetic stirring.

The borate fusion consists of mixing a powder sample with a fusion flux inside a platinum-5% gold crucible, heating to about 1000 – 1150 °C with agitation until complete reaction and dissolution to form a homogeneous molten glass. The molten glass is then cast into the beaker until the vitreous mass is thoroughly dissolved.

This method is currently the most widespread for the analysis of geological and elaborate materials, enabling the determination of major elements and a certain number of elements in traces. One major benefit of the xrFuse is that they are prepared for serial dissolutions, the fusion and digestion are fully automated inside the machine.

Here below the list of the most used fluxes and examples of applications for them.

Enough releasing agent is used to be sure the transfer is complete. Typically, 0.5% Lithium Bromide.

The peroxide fusion consists of mixing a powder sample with an alkali fusion flux inside a zirconium or nickel crucible, heating to approximately 600 – 800 °C with agitation until complete reaction and dissolution of the sample in the flux.

Then the hot mixture is cooled in situ to produce a vitreous mass often colored and easily soluble in dilute acids. In this type of fusion, reactions are made at extremely different temperatures and they can sometimes be very energetic with a possible risk of spattering.

The Phoenix GO ICP is the perfect tool as it can be programmed with an infinite amount of heating steps to gently bring the mix to temperature, all being done behind a safety door for the protection of the operator. The table below shows the most used fluxes and examples of applications for them.

Their reactivities can be classified as follows: 1. Peroxide, 2. Hydroxide, 3. Carbonate

These new gas fusion machines are designed to do multiple and repeatable fusions with hydroxide, peroxide and carbonate. These new Phoenix machines only use gas, without the need for oxygen and compressed air. They are developed for high uptime applications and made to endure repetitive exposure to aggressive environments.

With 8 fusion stations, the Phoenix GO 8000 ICP is specially made for high volume. The user interface is designed in such a way that it can match the needs for the most versatile application with an infinite amount of configurable steps.

This information has been sourced, reviewed and adapted from materials provided by XRF Scientific.

For more information on this source, please visit XRF Scientific.

Please use one of the following formats to cite this article in your essay, paper or report:

XRF Scientific. (2020, August 27). Using Borate and Peroxide Fusions for Dissolution in ICP. AZoM. Retrieved on May 27, 2022 from https://www.azom.com/article.aspx?ArticleID=19525.

XRF Scientific. "Using Borate and Peroxide Fusions for Dissolution in ICP". AZoM. 27 May 2022. <https://www.azom.com/article.aspx?ArticleID=19525>.

XRF Scientific. "Using Borate and Peroxide Fusions for Dissolution in ICP". AZoM. https://www.azom.com/article.aspx?ArticleID=19525. (accessed May 27, 2022).

XRF Scientific. 2020. Using Borate and Peroxide Fusions for Dissolution in ICP. AZoM, viewed 27 May 2022, https://www.azom.com/article.aspx?ArticleID=19525.

Do you have a question you'd like to ask regarding this article?

In this interview, AZoM talks to Chris Aylott, Senior Engineer at Newcastle University, about fatigue testing in the development of low carbon transport solutions.

AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.

In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.

This product profile outlines the Versa Flex Checkweighers from Thermo Fisher Scientific.

The LQA 300 FT-IR wine analyzer combines performance, accuracy, ease-of-use, and speed for the analysis of finished wine, must and must under fermentation samples in less than 45 seconds—all in one compact solution.

The SpectraStar™ XT-R Benchtop NIR can analyze virtually any sample type in less than a minute, including solid, slurry, or liquid samples.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022